Pyle PLA2678 2 Channel 4000 Watts Bridgeable Mosfet Amplifier

When power isn’t enough you need Pyle Power. This two-channel 4000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your speakers. To keep both your car and the amplifier safe this model is equipped with thermal overload and short circuit protection. So when what you need is power trust Pyle Power.

• Maximum Power Output 2 x 2000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB


• Bridgeable RMS Power @ 4 Ohms: 1x4000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection


• 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms


• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off


• Output Power @ 14.4v DC 50Hz - Silver RCA Inputs - Advanced Protection Circuitry


• Dimensions:10.24"W x 2.21"H x 16.14"L

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Pyle PLMRMP1A 2-Channel Waterproof MP3/iPod Marine Power Amplifier

This 2-channel waterproof MP3/iPod marine amplifier is a powerful addition to your marine audio setup. It pushes 200 watts maximum on each of the two channels for a bone-rattling power that’s basically unmatched. It takes RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Also takes standard high and low level inputs from a marine head-unit. Comes with a wired remote control for volume gain. For safety this amp is equipped with power protection circuitry and soft turn on/off prevents damage to your speaker equipment.

• Marine amplifier delivers 2 x 100 Watts RMS at 4 Ohms 2 x 200 Watts Max at 4 Ohms 2 x 300 Watts RMS at 2 Ohms


• Power protection circuitry with anti-thump turn-on and soft turn-off to protect your speakers


• Accepts RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily


• Also accepts standard high- and low-level inputs from marine head units


• Includes wired remote control for adjusting volume gain

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Pyle PLA2378 2 Channel 2000 Watts Bridgeable Mosfet Amplifier

When power isn’t enough you need Pyle Power. This two-channel 200-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your speakers. To keep both your car and the amplifier safe this model is equipped with thermal overload and short circuit protection. So when what you need is power trust Pyle Power.

• Maximum Power Output 2 x 1000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB


• Bridgeable RMS Power @ 4 Ohms: 1x2000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection -


• 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms


• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off


• Output Power @ 14.4v DC 50Hz - Silver RCA Inputs - Advanced Protection Circuitry


• Dimensions:10.24" W x 2.21" H x 11.02" L

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF

Power stereo amplifier capable of bridging featuring variable low pass filter 350W Max Power

• Power stereo amplifier capable of bridging


• Features variable low pass filter 350W Max Power

More detail ...

JVC KDR320 / KD-R320 / KD-R320 CD Receiver with Dual AUX

Maximum Power Output: 50W x 4

Continuous Power Output (RMS) (CEA-2006 Compliant): 20W RMS x 4 CH at 4 ohms and no more than 1.0% THD + N

MOS-FET Amplifier

24-bit Audio DAC

Source-Specific Volume Control

Volume Attenuator

Loudness Control

Balance/Fader Control

3-Band Parametric iEQ

HPF

Max. Amp Gain Switcher

Dual AUX Input (Front/Rear)

Line Output Terminals: 1 Pairs (Rear/Subwoofer Selectable)

Subwoofer Output with Level/Frequency Control: Yes (Rear/Subwoofer Selectable)

Line Output Level: 2.5V

Subwoofer Output Level: 2.5V

Detachable Faceplate

Oval-Shaped Wireless Remote Control

Beep Tone Support (From Speakers)

COMPU PLAY

Rotary Encoder

Power-Off Mode Eject

MP3/WMA Compatible with ID3 Tag/WMA Tag

CD-R/RW Compatible

CD Text

Random/Repeat Play

• Front and rear aux input.


• Auto dimmer and 50 watts X 4.

More detail ...